Steel and alloy steel

1045 Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Mild Steel 1045, with parts shipped across the USA and Canada.

CNC machined Mild Steel 1045 part

What is Mild Steel 1045?

Mild Steel 1045 is a medium-carbon steel that offers noticeably higher strength and impact resistance than low-carbon grades, while remaining practical to machine and weld.

In the normalized or hot-rolled condition it responds well to tapping, milling, drilling, turning and broaching when suitable speeds, feeds and tooling are used. Common applications include gears, pins & shafts, axles, bolts & studs and wear-resistant industrial parts. A quoted tensile strength of roughly 680 MPa is a practical starting point when sizing parts.

We CNC mill or turn these parts, supplied with an as-machined finish. As the steel has little natural corrosion protection, a coating, plating or oil finish is advisable.

3DMITECH machines Mild Steel 1045 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Mild Steel 1045 properties

Mechanical properties

Ultimate tensile strength
680 MPa (99 ksi)
Yield strength
580 MPa (84 ksi)
Modulus of elasticity
200 GPa (29 Msi)
Elongation at break
18%

Physical properties

Density
7.87 g/cm³ (0.284 lb/in³)
Hardness
84 HRB
Shear modulus
80 GPa (11.6 Msi)
Corrosion resistance
Low
UK / EU equivalent
EN8 (080M40)

Thermal properties

Maximum service temperature
Not specified
Thermal expansion coefficient
11.2–12 × 10⁻⁶ /°C (6.2–6.7 × 10⁻⁶ /°F)
Thermal conductivity
Not specified

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Heat treatment
Normalized / hot rolled
Recommended finish
Coating, plating or oil

Common applications

  • Gears, pins & shafts
  • Axles, bolts & studs
  • Wear-resistant industrial parts
  • High-strength machine parts

Figures shown are typical published values for Mild Steel 1045 and can vary with stock form and condition. Confirm any critical property before production.

Mild Steel 1045 CNC machining FAQs

1045 is a medium-carbon steel that machines well in the normalized or hot-rolled condition. It is harder than 1018, so cycle times can be slightly longer.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Mild Steel 1045 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

1045 rusts easily, so a protective coating, plating or oil is recommended. It can be supplied normalized or hot rolled; it is not suited to nitriding.

Common applications include gears, pins and shafts, axles, bolts and studs, wear-resistant industrial parts and high-strength machine parts.

1045 is an economical medium-carbon steel for moderately loaded parts. 4140 is a chromium-molybdenum alloy steel with higher fatigue and torsional strength, so choose it for heavily loaded shafts and gears.

Typical lead time for Mild Steel 1045 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.