Steel and alloy steel
A36 Structural Steel CNC Machining
Upload your CAD file for a custom CNC machining quote in Mild Steel A36, with parts shipped across the USA and Canada.

What is Mild Steel A36?
Mild Steel A36 is the most widely used hot-rolled structural steel. It combines good strength with toughness and ductility, making it a dependable, cost-effective choice for general engineering.
Its excellent weldability and formability allow it to be cut, drilled, punched, tapped and machined with ease, so it suits both prototypes and production parts. As a result it is often specified for bolted & welded structures, base plates, brackets & frames and jigs, fixtures & templates. A quoted tensile strength of roughly 550 MPa is a practical starting point when sizing parts.
Components are CNC milled or turned and left as-machined unless a finish is specified. Painting, plating or oiling is recommended to protect against rust.
3DMITECH machines Mild Steel A36 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Mild Steel A36 properties
Mechanical properties
- Ultimate tensile strength
- 550 MPa (80 ksi)
- Yield strength
- 290 MPa (42 ksi)
- Modulus of elasticity
- 200 GPa (29 Msi)
- Elongation at break
- 22%
Physical properties
- Density
- 7.85 g/cm³ (0.284 lb/in³)
- Hardness
- 92 HRB
- Shear modulus
- 79.3 GPa (11.5 Msi)
- Corrosion resistance
- Low
Thermal properties
- Maximum service temperature
- Not specified
- Thermal expansion coefficient
- 11–11.7 × 10⁻⁶ /°C (6.1–6.5 × 10⁻⁶ /°F)
- Thermal conductivity
- Not specified
Electrical properties
- Electrical resistivity
- Not specified
Finishing and post-processing
- Post-processing
- Welding, grinding, drilling
- Recommended finish
- Coating, plating or oil
Common applications
- Bolted & welded structures
- Base plates, brackets & frames
- Jigs, fixtures & templates
- Sprockets, cams & gears
Figures shown are typical published values for Mild Steel A36 and can vary with stock form and condition. Confirm any critical property before production.
Mild Steel A36 CNC machining FAQs
Yes. A36 is a tough, ductile structural steel that is easy to drill, tap, punch and grind, making it ideal for plates, brackets and frames.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Mild Steel A36 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Yes. A36 has excellent weldability and is widely used for bolted and welded structures. It rusts easily, so a coating, plating or oil finish is recommended.
Common applications include bolted and welded structures, base plates, brackets and frames, jigs, fixtures and templates, and sprockets, cams and gears.
A36 is a structural plate steel suited to welded frames and brackets. 1018 is a cold-finished bar grade with better machined finish and suitability for case hardening. Choose 1045 for higher strength.
Typical lead time for Mild Steel A36 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Mild Steel 1018
View material
Mild Steel 1045
View material
Alloy Steel 1215
View material
Stainless Steel 304
View material

