Steel and alloy steel

1018 Mild Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Mild Steel 1018, with parts shipped across the USA and Canada.

CNC machined Mild Steel 1018 part

What is Mild Steel 1018?

Grade 1018 is one of the most popular general-purpose steels in engineering. With only around 0.18% carbon, it is soft enough to cut quickly and cleanly, yet strong enough for brackets, plates, spacers, pins and many other everyday components.

Joining it is straightforward with almost any welding process, and it bends and forms without fuss. For parts that need a harder skin, such as gears or pins, case hardening adds a wear-resistant surface while the center stays tough. Exact strength varies with how the bar was produced.

We machine 1018 on CNC mills and lathes, and parts leave the machine with a clean metallic finish showing fine tool marks. Bare steel will rust quickly, so we suggest zinc plating, black oxide, paint or a light oil film to keep parts protected.

3DMITECH machines Mild Steel 1018 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Mild Steel 1018 properties

Mechanical properties

Ultimate tensile strength
440 MPa (64 ksi)
Yield strength
400 MPa (58 ksi)
Modulus of elasticity
205 GPa (29.7 Msi)
Elongation at break
15%

Physical properties

Density
7.87 g/cm³ (0.284 lb/in³)
Hardness
76 HRB
Shear modulus
80 GPa (11.6 Msi)
Corrosion resistance
Low
UK / EU equivalent
EN32 / 070M20

Thermal properties

Maximum service temperature
Not specified
Thermal expansion coefficient
11.5–12 × 10⁻⁶ /°C (6.4–6.7 × 10⁻⁶ /°F)
Thermal conductivity
Not specified

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Post-processing
Carburizing (case hardening)
Recommended finish
Coating, plating or oil

Common applications

  • Wear-resistant industrial parts
  • Gears, worms, pinions & ratchets
  • Pins, dowels, tool holders & die sets
  • Fixtures, mounting plates & spacers

Figures shown are typical published values for Mild Steel 1018 and can vary with stock form and condition. Confirm any critical property before production.

Mild Steel 1018 CNC machining FAQs

Yes. 1018 is a low-carbon steel that machines and welds easily and gives a good surface finish, making it an economical choice for general parts.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Mild Steel 1018 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Yes. 1018 is well suited to carburizing (case hardening), which gives a hard, wear-resistant surface over a tough core. It needs a protective finish such as plating, coating or oil because it rusts easily.

Common applications include wear-resistant industrial parts after case hardening, gears, worms, pinions and ratchets, pins, dowels and tool holders, and fixtures, mounting plates and spacers.

Choose 1018 for easy machining, welding and case-hardened parts. Choose 1045 when you need higher strength and impact resistance in the core. For very high-volume turned parts, 1215 is faster to machine.

Typical lead time for Mild Steel 1018 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.