Steel and alloy steel

4340 Alloy Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Alloy Steel 4340, with parts shipped across the USA and Canada.

CNC machined Alloy Steel 4340 part

What is Alloy Steel 4340?

Alloy Steel 4340 is a heat-treatable, low-alloy steel containing nickel, chromium and molybdenum. It is known for combining very high strength with excellent toughness.

After heat treatment it retains good wear resistance and fatigue strength, making it a strong candidate for highly stressed parts in aerospace, automotive and power transmission. Common applications include power transmission gears, drive shafts and aircraft landing gear. A quoted tensile strength of roughly 820 MPa is a practical starting point when sizing parts.

Components are CNC milled or turned to drawing. A protective finish such as black oxide, plating or oil is recommended for long-term corrosion protection.

3DMITECH machines Alloy Steel 4340 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Alloy Steel 4340 properties

Mechanical properties

Ultimate tensile strength
820 MPa (119 ksi)
Yield strength
525 MPa (76 ksi)
Modulus of elasticity
213 GPa (30.9 Msi)
Elongation at break
22%

Physical properties

Density
7.85 g/cm³ (0.284 lb/in³)
Hardness
24–53 HRC
Shear modulus
80 GPa (11.6 Msi)
Corrosion resistance
Good (atmospheric)
UK / EU equivalent
EN24 (817M40)

Thermal properties

Maximum service temperature
Melting point 1427°C
Thermal expansion coefficient
11.5–13 × 10⁻⁶ /°C (6.4–7.2 × 10⁻⁶ /°F)
Thermal conductivity
Not specified

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Heat treatment
Hardening & tempering
Recommended finish
Black oxide, plating or oil

Common applications

  • Power transmission gears
  • Drive shafts
  • Aircraft landing gear
  • Heavy-duty structural parts

Figures shown are typical published values for Alloy Steel 4340 and can vary with stock form and condition. Confirm any critical property before production.

Alloy Steel 4340 CNC machining FAQs

4340 machines well in the annealed or hardened-and-tempered condition, but its high strength means slower cutting than mild steel.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Alloy Steel 4340 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Yes. 4340 is a nickel-chromium-molybdenum steel that heat treats to very high strength while staying tough and fatigue resistant. Black oxide, plating or oil is recommended for protection, and welding needs care.

Common applications include power transmission gears, drive shafts, aircraft landing gear and heavy-duty structural parts.

Choose 4340 when the part must combine very high strength with toughness in thicker sections. 4140 is usually enough for general high-strength shafts, bolts and gears.

Typical lead time for Alloy Steel 4340 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.