Steel and alloy steel

4140 Alloy Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Alloy Steel 4140, with parts shipped across the USA and Canada.

CNC machined Alloy Steel 4140 part

What is Alloy Steel 4140?

Alloy Steel 4140 is a low-alloy steel containing chromium, molybdenum and manganese. It is valued for its high fatigue strength, toughness and resistance to wear and impact.

It machines well in the annealed condition and can be heat treated to raise strength and hardness, making it popular for demanding mechanical components. Frequent applications are heavy-duty shafts, connecting rods and high-tensile bolts. A quoted tensile strength of roughly 1130 MPa is a practical starting point when sizing parts.

Parts are produced by CNC milling or turning. Although it resists atmospheric corrosion better than plain carbon steel, a protective finish is recommended for harsh environments.

3DMITECH machines Alloy Steel 4140 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Alloy Steel 4140 properties

Mechanical properties

Ultimate tensile strength
1130 MPa (164 ksi)
Yield strength
715 MPa (104 ksi)
Modulus of elasticity
210 GPa (30.5 Msi)
Elongation at break
21.5%

Physical properties

Density
7.85 g/cm³ (0.284 lb/in³)
Hardness
28–32 HRC
Shear modulus
80 GPa (11.6 Msi)
Corrosion resistance
Good (atmospheric)
UK / EU equivalent
EN19 (709M40)

Thermal properties

Maximum service temperature
Melting point 1416°C
Thermal expansion coefficient
11.5–13.5 × 10⁻⁶ /°C (6.4–7.5 × 10⁻⁶ /°F)
Thermal conductivity
Not specified

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Heat treatment
Hardening & tempering
Recommended finish
Black oxide, plating or oil

Common applications

  • Heavy-duty shafts
  • Connecting rods
  • High-tensile bolts
  • Gears & spindles

Figures shown are typical published values for Alloy Steel 4140 and can vary with stock form and condition. Confirm any critical property before production.

Alloy Steel 4140 CNC machining FAQs

4140 machines well in the annealed or pre-hardened condition. It is tougher than mild steel, so cycle times are longer, but it gives a good finish.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Alloy Steel 4140 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Yes. 4140 can be hardened and tempered for higher strength and wear resistance. Black oxide, plating or oil is recommended for corrosion protection. Welding needs care.

Common applications include heavy-duty shafts, connecting rods, high-tensile bolts, and gears and spindles.

4140 is a versatile chromium-molybdenum steel for most high-strength parts. 4340 adds nickel for greater toughness in large sections and is preferred for the most demanding parts, such as landing gear and drive shafts.

Typical lead time for Alloy Steel 4140 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.