Tool steel

O1 Tool Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Tool Steel O1, with parts shipped across the USA and Canada.

CNC machined Tool Steel O1 part

What is Tool Steel O1?

Tool Steel O1 is a classic oil-hardening, "non-shrinking" tool steel that can reach around 65 HRC from a low hardening temperature.

It is a general-purpose grade chosen where alloy steels cannot deliver the required hardness, strength or wear resistance. As a result it is often specified for punches, dies & chuck jaws, plastic injection tooling and industrial knives & hammers. A quoted tensile strength of roughly 2360 MPa is a practical starting point when sizing parts.

Parts are CNC milled or turned before heat treatment, which produces only small dimensional changes. Finish options (as machined or ground) are confirmed with your quote.

3DMITECH machines Tool Steel O1 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Tool Steel O1 properties

Mechanical properties

Ultimate tensile strength
2360 MPa (342 ksi)
Yield strength
2140 MPa (310 ksi)
Modulus of elasticity
219 GPa (31.8 Msi)
Elongation at break
6.1%

Physical properties

Density
7.833 g/cm³ (0.283 lb/in³)
Hardness
255 HB
Shear modulus
Not specified
Corrosion resistance
Low
UK / EU equivalent
Gauge plate (BO1)

Thermal properties

Maximum service temperature
165–215°C (329–419°F)
Thermal expansion coefficient
11.3–11.8 × 10⁻⁶ /°C (6.3–6.6 × 10⁻⁶ /°F)
Thermal conductivity
41.2–44.6 W/(m·°C)

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Heat treatment
Hardening & tempering
Recommended finish
As machined or ground

Common applications

  • Punches, dies & chuck jaws
  • Plastic injection tooling
  • Industrial knives & hammers
  • Dowel pins & gauges

Figures shown are typical published values for Tool Steel O1 and can vary with stock form and condition. Confirm any critical property before production.

Tool Steel O1 CNC machining FAQs

Tool Steel O1 is machined in the annealed condition, then hardened.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Tool Steel O1 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Tool Steel O1 is normally finished by oil hardening and tempering. Parts can be supplied as machined or ground. Please state the hardness you need on your drawing.

Common applications include punches, dies and chuck jaws, plastic injection tooling, industrial knives and wear parts, and dowel pins and gauges.

O1 is an economical oil-hardening steel with good machinability and small dimensional change. A2 offers better stability for larger parts, and D2 offers much higher wear resistance.

Typical lead time for Tool Steel O1 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.