Tool steel

D2 Tool Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Tool Steel D2, with parts shipped across the USA and Canada.

CNC machined Tool Steel D2 part

What is Tool Steel D2?

Tool Steel D2 is a high-carbon, high-chromium, air-hardening tool steel. Its large chromium-rich carbides give it outstanding resistance to wear from sliding and abrasive contact.

It provides a well-balanced mix of wear resistance, toughness and cost, making it a go-to grade for long-running tools and dies. Frequent applications are punches & blanking dies, forming & trimming dies and shear & industrial knives. A quoted tensile strength of roughly 2500 MPa is a practical starting point when sizing parts.

D2 is machined in the annealed state by CNC milling or turning and can then be hardened. It provides mild corrosion resistance once hardened.

3DMITECH machines Tool Steel D2 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Tool Steel D2 properties

Mechanical properties

Ultimate tensile strength
2500 MPa (363 ksi)
Yield strength
2290 MPa (332 ksi)
Modulus of elasticity
215 GPa (31.2 Msi)
Elongation at break
15.2%

Physical properties

Density
7.695 g/cm³ (0.278 lb/in³)
Hardness
250 HB
Shear modulus
Not specified
Corrosion resistance
Mild (hardened)

Thermal properties

Maximum service temperature
195–245°C (383–473°F)
Thermal expansion coefficient
10.3–12 × 10⁻⁶ /°C (5.7–6.7 × 10⁻⁶ /°F)
Thermal conductivity
29.3–31.7 W/(m·°C)

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Heat treatment
Air hardening
Recommended finish
As machined or ground

Common applications

  • Punches & blanking dies
  • Forming & trimming dies
  • Shear & industrial knives
  • Thread-rolling dies & gauges

Figures shown are typical published values for Tool Steel D2 and can vary with stock form and condition. Confirm any critical property before production.

Tool Steel D2 CNC machining FAQs

Tool Steel D2 is machined in the annealed condition, then hardened. Its high chromium content makes it very wear resistant, so it is slower to machine than other tool steels.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Tool Steel D2 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Tool Steel D2 is normally finished by air hardening and tempering. Parts can be supplied as machined or ground. Please state the hardness you need on your drawing.

Common applications include punches, dies and chuck jaws, plastic injection tooling, industrial knives and wear parts, and dowel pins and gauges.

D2 offers the highest wear resistance of the common cold-work grades, but it is less tough than A2 or S7 and can be brittle if overloaded. Choose A2 for a balance of toughness and wear, or S7 where shock loading is expected.

Typical lead time for Tool Steel D2 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.