Tool steel
A2 Tool Steel CNC Machining
Upload your CAD file for a custom CNC machining quote in Tool Steel A2, with parts shipped across the USA and Canada.

What is Tool Steel A2?
Tool Steel A2 is a versatile air-hardening tool steel with good toughness and excellent dimensional stability during heat treatment.
Its wear resistance sits between O1 and D2, giving an effective balance of strength, toughness, tool performance and price. Common applications include punches, dies & chuck jaws, plastic injection tooling and industrial knives & hammers. A quoted tensile strength of roughly 2360 MPa is a practical starting point when sizing parts.
Parts are CNC milled or turned in the annealed state and can be hardened afterwards, keeping distortion to a minimum. Finish options (as machined or ground) are confirmed with your quote.
3DMITECH machines Tool Steel A2 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Tool Steel A2 properties
Mechanical properties
- Ultimate tensile strength
- 2360 MPa (342 ksi)
- Yield strength
- 2140 MPa (310 ksi)
- Modulus of elasticity
- 219 GPa (31.8 Msi)
- Elongation at break
- 6.1%
Physical properties
- Density
- 7.861 g/cm³ (0.284 lb/in³)
- Hardness
- 250 HB
- Shear modulus
- Not specified
- Corrosion resistance
- Low
Thermal properties
- Maximum service temperature
- 195–245°C (383–473°F)
- Thermal expansion coefficient
- 10.5–11 × 10⁻⁶ /°C (5.8–6.1 × 10⁻⁶ /°F)
- Thermal conductivity
- 36.1–39 W/(m·°C)
Electrical properties
- Electrical resistivity
- Not specified
Finishing and post-processing
- Heat treatment
- Hardening & tempering
- Recommended finish
- As machined or ground
Common applications
- Punches, dies & chuck jaws
- Plastic injection tooling
- Industrial knives & hammers
- Dowel pins & gauges
Figures shown are typical published values for Tool Steel A2 and can vary with stock form and condition. Confirm any critical property before production.
Tool Steel A2 CNC machining FAQs
Tool Steel A2 is machined in the annealed condition, then hardened. It machines well when annealed and moves very little during air hardening.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Tool Steel A2 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Tool Steel A2 is normally finished by air hardening and tempering. Parts can be supplied as machined or ground. Please state the hardness you need on your drawing.
Common applications include punches, dies and chuck jaws, plastic injection tooling, industrial knives and wear parts, and dowel pins and gauges.
A2 is tougher than D2 but less wear resistant. It distorts less in heat treatment than O1, making it a good general-purpose cold-work steel.
Typical lead time for Tool Steel A2 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Tool Steel D2
View material
Tool Steel O1
View material
Tool Steel A3
View material
Tool Steel S7
View material

