Tool steel
A3 Tool Steel CNC Machining
Upload your CAD file for a custom CNC machining quote in Tool Steel A3, with parts shipped across the USA and Canada.

What is Tool Steel A3?
Tool Steel A3 is a high-quality, high-carbon alloy cold-work tool steel, equivalent to ASTM A681 / UNS T30103.
It is typically supplied annealed below 250 HB and can be quenched and tempered for improved hardness and wear resistance. Frequent applications are punches, dies & chuck jaws, plastic injection tooling and industrial knives & hammers. A quoted tensile strength of roughly 2380 MPa is a practical starting point when sizing parts.
Parts are CNC milled or turned. A protective finish is recommended, as the steel offers limited corrosion resistance. Finish options (as machined or ground) are confirmed with your quote.
3DMITECH machines Tool Steel A3 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Tool Steel A3 properties
Mechanical properties
- Ultimate tensile strength
- 2380 MPa (345 ksi)
- Yield strength
- 2100 MPa (305 ksi)
- Modulus of elasticity
- 203 GPa (29.4 Msi)
- Elongation at break
- 1%
Physical properties
- Density
- 7.86 g/cm³ (0.284 lb/in³)
- Hardness
- 255 HB
- Shear modulus
- Not specified
- Corrosion resistance
- Low
Thermal properties
- Maximum service temperature
- Not specified
- Thermal expansion coefficient
- 11.8–14.3 × 10⁻⁶ /°C (6.6–7.9 × 10⁻⁶ /°F)
- Thermal conductivity
- 37 W/(m·°C)
Electrical properties
- Electrical resistivity
- Not specified
Finishing and post-processing
- Heat treatment
- Hardening & tempering
- Recommended finish
- As machined or ground
Common applications
- Punches, dies & chuck jaws
- Plastic injection tooling
- Industrial knives & hammers
- Dowel pins & gauges
Figures shown are typical published values for Tool Steel A3 and can vary with stock form and condition. Confirm any critical property before production.
Tool Steel A3 CNC machining FAQs
Tool Steel A3 is machined in the annealed condition, then hardened. It is a high-carbon cold-work steel, so it should be machined before hardening.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Tool Steel A3 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Tool Steel A3 is normally finished by hardening and tempering. Parts can be supplied as machined or ground. Please state the hardness you need on your drawing.
Common applications include punches, dies and chuck jaws, plastic injection tooling, industrial knives and wear parts, and dowel pins and gauges.
A3 sits between A2 and D2 for wear resistance. It rusts easily, so a protective finish or oil is advisable. Choose S7 instead where impact toughness matters most.
Typical lead time for Tool Steel A3 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Tool Steel A2
View material
Tool Steel D2
View material
Tool Steel O1
View material
Tool Steel S7
View material

