Tool steel

H13 Tool Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Tool Steel H13, with parts shipped across the USA and Canada.

CNC machined Tool Steel H13 part

What is Tool Steel H13?

Tool Steel H13 is the most widely used tool steel for hot- and cold-work tooling, thanks to its combination of high toughness and fatigue resistance.

Its chromium content helps it resist softening at high temperatures, making it ideal for die-casting, forging and extrusion tooling. As a result it is often specified for punches, dies & chuck jaws, plastic injection tooling and industrial knives & hammers. A quoted tensile strength of roughly 1590 MPa is a practical starting point when sizing parts.

We CNC mill or turn these parts, can be hardened and tempered after machining. Finish options (as machined or ground) are confirmed with your quote.

3DMITECH machines Tool Steel H13 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Tool Steel H13 properties

Mechanical properties

Ultimate tensile strength
1590 MPa (231 ksi)
Yield strength
1380 MPa (200 ksi)
Modulus of elasticity
215 GPa (31.2 Msi)
Elongation at break
9%

Physical properties

Density
7.8 g/cm³ (0.282 lb/in³)
Hardness
30–54 HRC
Shear modulus
Not specified
Corrosion resistance
Low

Thermal properties

Maximum service temperature
Not specified
Thermal expansion coefficient
10.4–12.4 × 10⁻⁶ /°C (5.8–6.9 × 10⁻⁶ /°F)
Thermal conductivity
22–29 W/(m·°C)

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Heat treatment
Hardening & tempering
Recommended finish
As machined or ground

Common applications

  • Punches, dies & chuck jaws
  • Plastic injection tooling
  • Industrial knives & hammers
  • Dowel pins & gauges

Figures shown are typical published values for Tool Steel H13 and can vary with stock form and condition. Confirm any critical property before production.

Tool Steel H13 CNC machining FAQs

Tool Steel H13 is machined in the annealed condition, then hardened. It machines well when annealed and is a hot-work steel with good toughness and red hardness.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Tool Steel H13 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Tool Steel H13 is normally finished by hardening and tempering. Parts can be supplied as machined or ground. Please state the hardness you need on your drawing.

Common applications include punches, dies and chuck jaws, plastic injection tooling, industrial knives and wear parts, and dowel pins and gauges.

H13 keeps its hardness at elevated temperatures, making it the usual choice for hot-work tooling and plastic injection molds. For cold-work tooling, D2 or A2 is usually more suitable.

Typical lead time for Tool Steel H13 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.