Stainless steel

430 Stainless Steel CNC Machining

Upload your CAD file for a custom CNC machining quote in Stainless Steel 430, with parts shipped across the USA and Canada.

CNC machined Stainless Steel 430 part

What is Stainless Steel 430?

Stainless Steel 430 is a ferritic stainless steel alloyed with chromium but little or no nickel. That makes it one of the most affordable stainless grades, with good general corrosion resistance, excellent resistance to oxidation, useful formability and low thermal expansion for a stainless steel.

Unlike 304, it is magnetic in all conditions and cannot be hardened by heat treatment. It resists nitric acid well, which suits certain chemical uses, and it is a favourite for appliance panels, dishwasher linings, cooker trim, chimney liners, fasteners and automotive trim where cost is a key factor.

We CNC mill and turn 430 from bar and plate, supplied with a clean as-machined finish. Its magnetic response also makes it useful for parts that need to work with magnets or sensors.

3DMITECH machines Stainless Steel 430 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Stainless Steel 430 properties

Mechanical properties

Ultimate tensile strength
586 MPa (85 ksi)
Yield strength
483 MPa (70 ksi)
Modulus of elasticity
200 GPa (29 Msi)
Elongation at break
20–25%

Physical properties

Density
7.75 g/cm³ (0.28 lb/in³)
Hardness
90 HRB
Corrosion resistance
Good (incl. nitric acid)
Magnetism
Magnetic
UK / EU equivalent
1.4016 / 430S17 (EN60)

Thermal properties

Maximum service temperature
870°C (1,598°F)
Thermal expansion coefficient
10.4 × 10⁻⁶ /K
Thermal conductivity
26.3 W/(m·K)

Electrical properties

Electrical resistivity
60 μΩ·cm

Finishing and post-processing

Heat treatment
Not hardenable
Weldability
Good with 150–200°C preheat

Common applications

  • Dishwasher & refrigerator panels
  • Stove trim & chimney liners
  • Element supports & fasteners
  • Automotive trim

Figures shown are typical published values for Stainless Steel 430 and can vary with stock form and condition. Confirm any critical property before production.

Stainless Steel 430 CNC machining FAQs

430 (1.4016) is a ferritic stainless that machines more easily than 304 because it does not work harden as strongly. It is magnetic in all conditions.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Stainless Steel 430 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

430 cannot be hardened by heat treatment. It can be welded with a 150–200°C preheat, and passivation can be specified to improve corrosion resistance.

Common applications include dishwasher and refrigerator panels, stove trim and chimney liners, element supports and fasteners, and automotive trim.

Choose 430 when you need a magnetic stainless steel with good oxidation resistance and low thermal expansion. Choose 304 for better general corrosion resistance and weldability.

Typical lead time for Stainless Steel 430 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.