Stainless steel
303 Stainless Steel CNC Machining
Upload your CAD file for a custom CNC machining quote in Stainless Steel 303, with parts shipped across the USA and Canada.

What is Stainless Steel 303?
Stainless Steel 303 is a free-machining austenitic grade, made by adding sulfur to the classic 18/8 chromium-nickel recipe. That small change helps chips break cleanly, so 303 cuts faster and with less tool wear than most other stainless steels, which suits busy CNC lathes.
The trade-off is corrosion resistance. 303 holds up well indoors and in mild atmospheres, but it is less resistant than 304 and is not recommended for marine or warm chloride conditions. Welding is also poor, so designs are best joined with threads, press fits or fasteners instead.
We CNC turn and mill 303 from round and hexagon bar, making it a cost-effective choice for nuts, screws, shafts, bushings and fittings in batches large or small. Parts are supplied with a clean as-machined finish.
3DMITECH machines Stainless Steel 303 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Stainless Steel 303 properties
Mechanical properties
- Ultimate tensile strength
- 621 MPa (90 ksi)
- Yield strength
- 276 MPa (40 ksi)
- Modulus of elasticity
- 193 GPa (28 Msi)
- Elongation at break
- 35% min
Physical properties
- Density
- 8.03 g/cm³ (0.29 lb/in³)
- Hardness
- 230 HB max
- Corrosion resistance
- Good in mild conditions (below 304)
- Melting point
- 1455°C (2,651°F)
- UK / EU equivalent
- 1.4305 / 303S31 (EN58M)
Thermal properties
- Maximum service temperature
- Not specified
- Thermal expansion coefficient
- 17.3 × 10⁻⁶ /K
- Thermal conductivity
- 16.3 W/(m·K)
Electrical properties
- Electrical resistivity
- 72 μΩ·cm
Finishing and post-processing
- Machinability
- Excellent
- Weldability
- Poor (sulfur addition)
Common applications
- Nuts, bolts & screws
- Shafts & bushings
- Gears
- Aircraft fittings
Figures shown are typical published values for Stainless Steel 303 and can vary with stock form and condition. Confirm any critical property before production.
Stainless Steel 303 CNC machining FAQs
Yes. 303 is the free-machining austenitic stainless steel. Its sulfur addition gives excellent chip breaking, making it ideal for turned parts in larger quantities.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Stainless Steel 303 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
303 usually ships as machined, and passivation can be specified to improve corrosion resistance. It has poor weldability because of its sulfur content.
Common applications include nuts, bolts and screws, shafts and bushings, gears and aircraft fittings.
Choose 303 when machining efficiency is the priority. Choose 304 for better corrosion resistance and weldability, or 316 for marine and chemical environments. 303 is not recommended for marine use.
Typical lead time for Stainless Steel 303 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Stainless Steel 304
View material
Stainless Steel 316
View material
Alloy Steel 1215
View material
Brass C360
View material

