Stainless steel
201 Stainless Steel CNC Machining
Upload your CAD file for a custom CNC machining quote in Stainless Steel 201, with parts shipped across the USA and Canada.

What is Stainless Steel 201?
Stainless Steel 201 is an austenitic stainless in which part of the nickel found in 304 is replaced with manganese and nitrogen. The result is a lower-cost grade with higher strength than 304, good toughness at low temperatures and good formability for stamped, bent and drawn parts.
It is widely used for kitchen equipment, appliances, decorative tubing, furniture and architectural trim. Indoors its corrosion resistance is broadly comparable to 304, but it is more prone to pitting in salt water and to stress corrosion after welding, so keep it away from coastal or outdoor structural use.
We CNC mill and turn 201 from bar and plate when cost matters and the environment is mild. Like other austenitic grades it work hardens, so sharp tools and steady feeds give the best results.
3DMITECH machines Stainless Steel 201 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Stainless Steel 201 properties
Mechanical properties
- Ultimate tensile strength
- 685 MPa (99 ksi)
- Yield strength
- 292 MPa (42 ksi)
- Modulus of elasticity
- 197 GPa (28.6 Msi)
- Elongation at break
- 56%
Physical properties
- Density
- 7.86 g/cm³ (0.284 lb/in³)
- Hardness
- 85 HRB
- Corrosion resistance
- Moderate (best indoors)
- Melting range
- 1399–1454°C (2,550–2,649°F)
- UK / EU equivalent
- 1.4372 (UNS S20100)
Thermal properties
- Maximum service temperature
- Not specified
- Thermal expansion coefficient
- 17 × 10⁻⁶ /K
- Thermal conductivity
- 15 W/(m·K)
Electrical properties
- Electrical resistivity
- Not specified
Finishing and post-processing
- Weldability
- Reasonable; passivate after welding
- Recommended use
- Indoor, low-corrosion environments
Common applications
- Kitchen equipment & appliances
- Architectural panels & trim
- Decorative & industrial tubes
- Threaded fasteners
Figures shown are typical published values for Stainless Steel 201 and can vary with stock form and condition. Confirm any critical property before production.
Stainless Steel 201 CNC machining FAQs
201 (1.4372) is an austenitic stainless with high strength. It work hardens when cut, so it machines more slowly than mild steel, much like 304.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Stainless Steel 201 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
201 usually ships as machined or polished. Passivation after welding is recommended.
Common applications include kitchen equipment and appliances, architectural panels and trim, decorative and industrial tubes and threaded fasteners, mainly in indoor, low-corrosion environments.
201 is a lower-cost austenitic grade for indoor use. 304 offers better corrosion resistance, and 316 is needed for marine or salt-water conditions, where 201 is prone to pitting.
Typical lead time for Stainless Steel 201 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Stainless Steel 304
View material
Stainless Steel 430
View material
Stainless Steel 316
View material
Stainless Steel 303
View material

