Plastics
Rubber CNC Machining
Upload your CAD file for a custom CNC machining quote in Rubber, with parts shipped across the USA and Canada.

What is Rubber?
Rubber is a highly elastic polymer that deforms easily under a small force and returns to its original shape once the load is removed.
As a fully amorphous polymer with a low glass transition temperature, it stays flexible at room temperature and below. As a result it is often specified for seals & gaskets, consumer products and medical applications. A quoted tensile strength of roughly 165 MPa is a practical starting point when sizing parts.
Parts are CNC machined and supplied in black. Finish options (as machined) are confirmed with your quote. Every order is checked against your drawing before dispatch.
3DMITECH machines Rubber parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Rubber properties
Mechanical properties
- Ultimate tensile strength
- 165 MPa (24 ksi)
- Yield strength
- 145 MPa (21 ksi)
- Modulus of elasticity
- Not specified
- Elongation at break
- 5–1450%
Physical properties
- Density
- 0.70–3.80 g/cm³ (0.025–0.137 lb/in³)
- Hardness
- Not specified
- Elasticity
- Highly elastic
Thermal properties
- Maximum service temperature
- Not specified
- Thermal expansion coefficient
- Not specified
- Thermal conductivity
- Not specified
Electrical properties
- Electrical resistivity
- Not specified
Finishing and post-processing
- Post-processing
- Deburring
- Recommended finish
- As machined
Common applications
- Seals & gaskets
- Consumer products
- Medical applications
- Vibration dampers
Figures shown are typical published values for Rubber and can vary with stock form and condition. Confirm any critical property before production.
Rubber CNC machining FAQs
Rubber can be machined, but it is highly elastic, so it moves under cutting forces. Simple shapes such as seals, gaskets and pads work best.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Rubber depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Rubber parts are usually supplied as machined and deburred.
Common applications include seals and gaskets, vibration dampers, consumer products and medical applications.
State the compound and hardness you need for critical parts. If the part needs to hold tight dimensions or carry loads, a harder material such as polyethylene or nylon may be more suitable.
Typical lead time for Rubber parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Polyethylene (PE)
View material
PTFE (Teflon)
View material
Polypropylene (PP)
View material
Nylon 12
View material

