Plastics
Polypropylene CNC Machining
Upload your CAD file for a custom CNC machining quote in Polypropylene (PP), with parts shipped across the USA and Canada.

What is Polypropylene (PP)?
Polypropylene (PP) is a tough, rigid and crystalline thermoplastic. It is the second most widely produced plastic after PE and is harder and more heat resistant.
It is lightweight, chemically stable and will not rust, with good insulation and low thermal conductivity. Frequent applications are packaging, consumer products and medical applications. A quoted tensile strength of roughly 33 MPa is a practical starting point when sizing parts. If you are unsure whether Polypropylene (PP) suits your design, our engineers can review it and suggest an alternative.
We CNC mill or turn these parts, available in white or black. Its high thermal expansion should be considered for tight-tolerance parts.
3DMITECH machines Polypropylene (PP) parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Polypropylene (PP) properties
Mechanical properties
- Ultimate tensile strength
- 33 MPa (4.8 ksi)
- Yield strength
- 32 MPa (4.6 ksi)
- Modulus of elasticity
- 1.6 GPa (0.23 Msi)
- Elongation at break
- 8–12%
Physical properties
- Density
- 0.90–0.91 g/cm³ (0.033–0.033 lb/in³)
- Hardness
- 102 HRR
- Melting point
- 171°C (340°F)
Thermal properties
- Maximum service temperature
- 130°C (266°F)
- Thermal expansion coefficient
- 17 × 10⁻⁶ /°C (9.4 × 10⁻⁶ /°F)
- Thermal conductivity
- 0.27 W/(m·°C)
Electrical properties
- Electrical insulation
- Good
Finishing and post-processing
- Post-processing
- Deburring / bead blasting
- Recommended finish
- As machined
Common applications
- Packaging
- Consumer products
- Medical applications
- Chemical-resistant parts
Figures shown are typical published values for Polypropylene (PP) and can vary with stock form and condition. Confirm any critical property before production.
Polypropylene (PP) CNC machining FAQs
Polypropylene can be machined, but it is soft and flexible and can deform from heat, so sharp tools and careful fixturing are needed.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Polypropylene (PP) depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
PP usually ships as machined, deburred or bead blasted.
Common applications include packaging, consumer products, medical applications and chemical-resistant parts.
Both are light and chemically resistant. PP has a slightly higher service temperature and stiffness, while PE is tougher at low temperatures and has excellent weather resistance. PTFE suits harsher chemical environments.
Typical lead time for Polypropylene (PP) parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Polyethylene (PE)
View material
PTFE (Teflon)
View material
Nylon 12
View material
ABS
View material

