Plastics

Polyethylene (PE) CNC Machining

Upload your CAD file for a custom CNC machining quote in Polyethylene (PE), with parts shipped across the USA and Canada.

CNC machined Polyethylene (PE) part

What is Polyethylene (PE)?

Polyethylene (PE) is the most common plastic in use today, prized for its chemical and weather resistance.

It provides a high strength-to-weight ratio and good impact strength at a low cost. Common applications include piping, packaging and chemical tanks & liners. A quoted tensile strength of roughly 31 MPa is a practical starting point when sizing parts. If you are unsure whether Polyethylene (PE) suits your design, our engineers can review it and suggest an alternative.

We CNC mill or turn these parts, available in black or white. Finish options (as machined) are confirmed with your quote. Every order is checked against your drawing before dispatch.

3DMITECH machines Polyethylene (PE) parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Polyethylene (PE) properties

Mechanical properties

Ultimate tensile strength
31 MPa (4.5 ksi)
Yield strength
31 MPa (4.5 ksi)
Modulus of elasticity
1.09 GPa (0.16 Msi)
Elongation at break
500–700%

Physical properties

Density
0.96 g/cm³ (0.035 lb/in³)
Hardness
9.9 HV
Melting point
135°C (275°F)

Thermal properties

Maximum service temperature
129°C (264°F)
Thermal expansion coefficient
198 × 10⁻⁶ /°C (110 × 10⁻⁶ /°F)
Thermal conductivity
0.502 W/(m·°C)

Electrical properties

Electrical insulation
Good

Finishing and post-processing

Post-processing
Deburring / bead blasting
Recommended finish
As machined

Common applications

  • Piping
  • Packaging
  • Chemical tanks & liners
  • Wear strips

Figures shown are typical published values for Polyethylene (PE) and can vary with stock form and condition. Confirm any critical property before production.

Polyethylene (PE) CNC machining FAQs

Polyethylene machines easily but is soft and has low heat resistance, so sharp tools and careful clamping are needed to avoid deformation.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Polyethylene (PE) depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

PE usually ships as machined, deburred or bead blasted.

Common applications include piping, packaging, chemical tanks and liners, and wear strips.

PE is light, tough and economical with good chemical resistance. PTFE offers wider chemical resistance, lower friction and a much higher service temperature, but it is softer and costs more.

Typical lead time for Polyethylene (PE) parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.