Plastics
Nylon 12 CNC Machining
Upload your CAD file for a custom CNC machining quote in Nylon 12, with parts shipped across the USA and Canada.

What is Nylon 12?
Nylon 12 is a polyamide made from monomers with 12 carbon atoms, which gives it lower moisture absorption than many other nylons. Stock is typically supplied in black / white.
It combines good impact resistance and toughness with stable performance under heat, suiting functional parts that see repeated use. As a result it is often specified for complex structural parts, parts under thermal load and automotive parts. A quoted tensile strength of roughly 31 MPa is a practical starting point when sizing parts.
We CNC mill or turn these parts, available in black or white. Finish options (as machined) are confirmed with your quote. Every order is checked against your drawing before dispatch.
3DMITECH machines Nylon 12 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Nylon 12 properties
Mechanical properties
- Ultimate tensile strength
- 31 MPa (4.5 ksi)
- Yield strength
- Not specified
- Modulus of elasticity
- 2.9 GPa (0.42 Msi) (tensile)
- Elongation at break
- 9%
Physical properties
- Density
- 1.01 g/cm³ (0.036 lb/in³)
- Hardness
- Not specified
- Yield elongation
- 8%
Thermal properties
- Maximum service temperature
- 113°C (235°F) (HDT)
- Thermal expansion coefficient
- Not specified
- Thermal conductivity
- Not specified
Electrical properties
- Electrical insulation
- Good
Finishing and post-processing
- Post-processing
- Deburring / bead blasting
- Recommended finish
- As machined
Common applications
- Complex structural parts
- Parts under thermal load
- Automotive parts
- Medical correction devices
Figures shown are typical published values for Nylon 12 and can vary with stock form and condition. Confirm any critical property before production.
Nylon 12 CNC machining FAQs
Yes. Nylon 12 is tough and impact resistant and stays stable under heat and repeated use. It can have a slightly grainy surface.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Nylon 12 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Nylon 12 usually ships as machined, deburred or bead blasted.
Common applications include complex structural parts, parts under thermal load, automotive parts and medical correction devices.
Nylon 12 absorbs less moisture than nylon 6, so it is more dimensionally stable in humid conditions. Nylon 6 has higher strength and stiffness. POM-C is an alternative for precise low-friction parts.
Typical lead time for Nylon 12 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Nylon 6
View material
POM-C
View material
Polypropylene (PP)
View material
PEEK
View material

