Titanium and other metals

Grade 5 Titanium CNC Machining

Upload your CAD file for a custom CNC machining quote in Titanium Grade 5 (TC4), with parts shipped across the USA and Canada.

CNC machined Titanium Grade 5 (TC4) part

What is Titanium Grade 5 (TC4)?

Titanium Grade 5, also known as Ti-6Al-4V or TC4, is the most widely used titanium alloy. Alloyed with around 6% aluminum and 4% vanadium, it pairs a two-phase alpha-beta structure with an exceptional strength-to-weight ratio, outstanding corrosion resistance and excellent biocompatibility.

Its strength holds from cryogenic conditions up to roughly 427°C, which is why Grade 5 is specified for jet engine parts, airframe components, pressure vessels, high-performance fasteners and frames. It can be supplied annealed or solution treated and aged, depending on the strength and toughness required.

We CNC mill and turn Grade 5 titanium with rigid set-ups, sharp tooling and plenty of coolant, as its low thermal conductivity concentrates heat at the cutting edge. It is non-magnetic and suits medical, marine and lightweight structural parts.

3DMITECH machines Titanium Grade 5 (TC4) parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Titanium Grade 5 (TC4) properties

Mechanical properties

Ultimate tensile strength
950 MPa (138 ksi)
Yield strength
880 MPa (128 ksi)
Modulus of elasticity
113.8 GPa (16.5 Msi)
Elongation at break
5–18%

Physical properties

Density
4.47 g/cm³ (0.161 lb/in³)
Hardness
334 HB
Corrosion resistance
High
Magnetism
Non-magnetic
UK / EU equivalent
Ti-6Al-4V (TC4)

Thermal properties

Maximum service temperature
427°C (801°F)
Thermal expansion coefficient
Not specified
Thermal conductivity
Not specified

Electrical properties

Electrical resistivity
Not specified

Finishing and post-processing

Biocompatibility
Excellent
Heat treatment
Annealed or solution treated & aged

Common applications

  • Aerospace components
  • Marine & chemical equipment
  • Medical & electronic parts
  • Fasteners & heat exchangers

Figures shown are typical published values for Titanium Grade 5 (TC4) and can vary with stock form and condition. Confirm any critical property before production.

Titanium Grade 5 (TC4) CNC machining FAQs

Titanium Grade 5 (Ti-6Al-4V) is more demanding to machine than aluminum or steel. It conducts heat poorly, so it is cut at lower speeds with careful cooling, which increases machining time.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Titanium Grade 5 (TC4) depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Grade 5 can be supplied as machined or bead blasted, and it is available annealed or solution treated and aged. Its natural corrosion resistance means a coating is not usually needed.

Common applications include aerospace components, marine and chemical equipment, medical and electronic parts, and fasteners and heat exchangers. It has excellent biocompatibility and is non-magnetic.

Titanium Grade 5 is stronger, more corrosion resistant and works at higher temperatures, but it costs more to buy and machine. Aluminum 7075 is a lighter, more economical choice when its strength is sufficient.

Typical lead time for Titanium Grade 5 (TC4) parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.