Brass and copper

C360 Brass CNC Machining

Upload your CAD file for a custom CNC machining quote in Brass C360, with parts shipped across the USA and Canada.

CNC machined Brass C360 part

What is Brass C360?

Brass C360 is the classic free-machining brass. A small lead addition makes chips break short and clear easily, so it machines faster than almost any other metal and sets the benchmark for machinability.

It gives a bright, attractive finish straight off the machine, resists corrosion well in most everyday environments and is non-magnetic. These qualities make it ideal for precision turned parts, locks, hinges, low-friction components and hardware. It is not suited to cold forming, and welding is not recommended.

We CNC turn and mill C360 brass from round, hexagon, square and flat bar, so it is very cost-effective for fittings, inserts and decorative parts in any quantity. If your application has lead restrictions, mention this when you order.

3DMITECH machines Brass C360 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Brass C360 properties

Mechanical properties

Ultimate tensile strength
360–500 MPa (52–73 ksi)
Yield strength
230–350 MPa (33–51 ksi)
Modulus of elasticity
97 GPa (14.1 Msi)
Elongation at break
5–20%

Physical properties

Density
8.47 g/cm³ (0.306 lb/in³)
Hardness
90–160 HB
Corrosion resistance
Fair to excellent
Melting point
875°C (1,607°F)
UK / EU equivalent
UK supply grade: CZ121 / CW614N (CuZn39Pb3, UNS C38500)

Thermal properties

Maximum service temperature
Not specified
Thermal expansion coefficient
20.9 × 10⁻⁶ /K
Thermal conductivity
123 W/(m·K)

Electrical properties

Electrical resistivity
6.2 μΩ·cm

Finishing and post-processing

Machinability
Excellent (rating 100 – the benchmark)
Joining
Soldering excellent; brazing good

Common applications

  • High-speed turned components
  • Locks & hinges
  • Low-friction moving parts
  • Telecommunication hardware

Figures shown are typical published values for Brass C360 and can vary with stock form and condition. Confirm any critical property before production.

Brass C360 CNC machining FAQs

C360 is the benchmark free-machining brass, rated 100 for machinability. It cuts fast with short chips and leaves a bright finish.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Brass C360 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

C360 is often left as machined or polished, and it can be plated. It solders very well and brazes well, but welding is not recommended.

Common applications include high-speed turned components, locks and hinges, low-friction moving parts and telecommunications hardware.

Choose brass C360 for fast machining, good corrosion resistance and low friction. Choose copper C110 when electrical or thermal conductivity is the priority. Note that C360 contains lead, so check suitability for drinking water or food contact.

Typical lead time for Brass C360 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.