Plastics
Nylon 6 CNC Machining
Upload your CAD file for a custom CNC machining quote in Nylon 6, with parts shipped across the USA and Canada.

What is Nylon 6?
Nylon 6 is a widely used engineering thermoplastic known for its high toughness and strength. Stock is typically supplied in ivory / black.
It provides good damping and high shock resistance, even when dry and at low temperatures, along with good resistance to wear and chemicals. Common applications include transportation parts, electrical components and bushings & wear pads. A quoted tensile strength of roughly 79.1 MPa is a practical starting point when sizing parts.
We CNC mill or turn these parts, available in ivory or black. Finish options (as machined) are confirmed with your quote. Every order is checked against your drawing before dispatch.
3DMITECH machines Nylon 6 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Nylon 6 properties
Mechanical properties
- Ultimate tensile strength
- 79.1 MPa (11 ksi)
- Yield strength
- 63.8 MPa (9.3 ksi)
- Modulus of elasticity
- 1.97 GPa (0.29 Msi)
- Elongation at break
- 200–300%
Physical properties
- Density
- 1.084 g/cm³ (0.039 lb/in³)
- Hardness
- 18.1 HV
- Melting point
- 220°C (428°F)
Thermal properties
- Maximum service temperature
- 130°C (266°F)
- Thermal expansion coefficient
- 91.8 × 10⁻⁶ /°C (51 × 10⁻⁶ /°F)
- Thermal conductivity
- 0.306 W/(m·°C)
Electrical properties
- Electrical insulation
- Good
Finishing and post-processing
- Post-processing
- Deburring / bead blasting
- Recommended finish
- As machined
Common applications
- Transportation parts
- Electrical components
- Bushings & wear pads
- Gears & rollers
Figures shown are typical published values for Nylon 6 and can vary with stock form and condition. Confirm any critical property before production.
Nylon 6 CNC machining FAQs
Yes. Nylon 6 is strong, tough and wear resistant and machines well. It absorbs moisture, which can slightly change its dimensions over time.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Nylon 6 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Nylon 6 usually ships as machined, deburred or bead blasted.
Common applications include transportation parts, electrical components, bushings and wear pads, and gears and rollers.
Nylon 6 is tougher and more impact resistant, but it absorbs moisture. POM-C is more dimensionally stable, with lower friction, and is often preferred for precision gears and bearings.
Typical lead time for Nylon 6 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Nylon 12
View material
POM-C
View material
PEEK
View material
Polypropylene (PP)
View material

