Aluminum

Aluminum 6082-T6 CNC Machining

Upload your CAD file for a custom CNC machining quote in Aluminum 6082, with parts shipped across the USA and Canada.

CNC machined Aluminum 6082 part

What is Aluminum 6082?

Aluminum 6082-T6 is a lightweight engineering alloy with a natural silver-white appearance. It provides a strong balance of mechanical strength, corrosion resistance and machinability, making it useful for brackets, fixtures, machine components and structural parts.

The T6 temper means the material has been solution heat-treated and artificially aged to increase strength. Aluminum 6082-T6 is commonly selected for transport equipment, industrial machinery and structural applications where components must support mechanical loads.

Custom parts are produced using CNC milling or turning. As-machined surfaces retain fine tooling marks. Anodizing can be specified where available for surface protection, although its decorative appearance may be less uniform than on aluminum 6063.

3DMITECH machines Aluminum 6082 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Aluminum 6082 properties

Mechanical properties

Ultimate tensile strength
310–330 MPa (45–48 ksi)
Yield strength
270–280 MPa (39–41 ksi)
Modulus of elasticity
69–70 GPa (10–10.2 Msi)
Elongation at break
6–10%

Physical properties

Density
2.70 g/cm³ (0.098 lb/in³)
Hardness
Not specified
Corrosion resistance
High
Magnetism
Non-magnetic
UK / EU equivalent
HE30

Thermal properties

Maximum service temperature
170°C (338°F)
Thermal expansion coefficient
23.4 × 10⁻⁶ /°C (13 × 10⁻⁶ /°F)
Thermal conductivity
160–180 W/(m·°C)

Electrical properties

Electrical resistivity
3.8–4.1 μΩ·cm

Finishing and post-processing

Anodizing
Suitable
Weldability
High

Common applications

  • Structural & architectural components
  • Pressure vessel parts
  • Marine components
  • Automation & machine frames

Figures shown are typical published values for Aluminum 6082 and can vary with stock form and condition. Confirm any critical property before production.

Aluminum 6082 CNC machining FAQs

Yes. 6082 machines well and is widely used for structural and engineering parts. Large parts with heavy material removal can move slightly as residual stresses are released, so this is allowed for in planning.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Aluminum 6082 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Yes, 6082 is suitable for functional anodizing for wear and corrosion protection. Decorative anodizing can look less uniform than on 6063 or 6061, so mention it if appearance is critical.

Common uses include structural and architectural components, pressure vessel parts, marine components and automation and machine frames, where good strength-to-weight and corrosion resistance are needed.

Both are general-purpose heat-treatable alloys. 6082 (HE30) is a common European structural grade with slightly higher strength, while 6061 is more widely specified internationally and often gives a more even decorative anodized finish.

Typical lead time for Aluminum 6082 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.