Aluminum

Aluminum 6082-T651 CNC Machining

Upload your CAD file for a custom CNC machining quote in Aluminum 6082-T651, with parts shipped across the USA and Canada.

CNC machined Aluminum 6082-T651 part

What is Aluminum 6082-T651?

Aluminum 6082-T651 is a lightweight engineering alloy with a natural silver-white appearance. It combines good strength, corrosion resistance and machinability, making it suitable for tooling plates, fixtures, brackets and structural components.

The T651 temper means the material has been solution heat-treated, stress-relieved by stretching and artificially aged. This reduces residual stresses and helps limit distortion when machining substantial amounts of material from plate.

Custom parts are produced using CNC milling or turning. As-machined surfaces retain fine tooling marks. Anodizing can be specified where available for surface protection, although decorative color and appearance may be less uniform than on aluminum 6063.

3DMITECH machines Aluminum 6082-T651 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Aluminum 6082-T651 properties

Mechanical properties

Ultimate tensile strength
275–320 MPa (40–46 ksi)
Yield strength
240–270 MPa (35–39 ksi)
Modulus of elasticity
69–70 GPa (10–10.2 Msi)
Elongation at break
6–10%

Physical properties

Density
2.70 g/cm³ (0.098 lb/in³)
Hardness
95 HB
Corrosion resistance
High
Magnetism
Non-magnetic
UK / EU equivalent
HE30

Thermal properties

Maximum service temperature
150°C (302°F)
Thermal expansion coefficient
23.4 × 10⁻⁶ /°C (13 × 10⁻⁶ /°F)
Thermal conductivity
170 W/(m·°C)

Electrical properties

Electrical resistivity
3.5 µΩ·cm

Finishing and post-processing

Anodizing compatibility
Suitable
Weldability
High

Common applications

  • Tooling plates
  • Structural components
  • Machining fixtures
  • Truss components and heat sinks

Figures shown are typical published values for Aluminum 6082-T651 and can vary with stock form and condition. Confirm any critical property before production.

Aluminum 6082-T651 CNC machining FAQs

T651 means the alloy has been solution heat-treated, stress-relieved by stretching and artificially aged. The stretching reduces residual stresses, so plate is less likely to distort as material is removed.

Yes. Its stress-relieved condition, good strength and machinability make it a common choice for tooling plates, fixtures and structural parts machined from plate.

Both tempers are artificially aged to a similar strength level. T651 plate is additionally stress-relieved by stretching, which helps limit distortion during heavier machining.

Yes. Anodizing is suitable for surface protection. Decorative color and appearance may be less uniform than on aluminum 6063, so this should be considered where a cosmetic finish is important.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Aluminum 6082-T651 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Typical lead time for Aluminum 6082-T651 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.