Aluminum
Aluminum 5052-H112 CNC Machining
Upload your CAD file for a custom CNC machining quote in Aluminum 5052, with parts shipped across the USA and Canada.

What is Aluminum 5052?
Aluminum 5052-H112 is a lightweight aluminum-magnesium alloy with a natural silver-white appearance. It provides good corrosion resistance, weldability and formability, making it useful for covers, housings, panels and marine components.
The H112 condition describes material that acquires some temper during shaping, with specified mechanical-property limits. Unlike heat-treatable alloys such as 6061, aluminum 5052 cannot be strengthened by precipitation heat treatment; its strength can be increased through cold working.
Custom parts can be produced using CNC milling or turning, although its softer cutting behavior requires suitable tooling and machining conditions. As-machined surfaces retain fine tooling marks, while anodizing can be specified where available for surface protection and appearance.
3DMITECH machines Aluminum 5052 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Aluminum 5052 properties
Mechanical properties
- Ultimate tensile strength
- 170–210 MPa (25–30 ksi)
- Yield strength
- 70–90 MPa (10–13 ksi)
- Modulus of elasticity
- 70 GPa (10.2 Msi)
- Elongation at break
- 12–20%
Physical properties
- Density
- 2.68 g/cm³ (0.097 lb/in³)
- Hardness
- Not specified
- Corrosion resistance
- High
- Magnetism
- Non-magnetic
- UK / EU equivalent
- AlMg2.5
Thermal properties
- Maximum service temperature
- 190°C (374°F)
- Thermal expansion coefficient
- 24 × 10⁻⁶ /°C (13.3 × 10⁻⁶ /°F)
- Thermal conductivity
- 145–160 W/(m·°C)
Electrical properties
- Electrical resistivity
- 5.0 μΩ·cm
Finishing and post-processing
- Anodizing
- Suitable
- Weldability
- High
Common applications
- Marine & shipbuilding parts
- Pressure vessel components
- Transport & vehicle parts
- Architectural & decorative trim
Figures shown are typical published values for Aluminum 5052 and can vary with stock form and condition. Confirm any critical property before production.
Aluminum 5052 CNC machining FAQs
5052 can be machined well, but it is softer and less free-machining than 6061, so it can produce longer chips and burrs. It is chosen more for corrosion resistance and formability than for machinability.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Aluminum 5052 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Yes. 5052 anodizes well and has outstanding weldability, making it a strong choice for welded marine and pressure parts.
Common applications include marine and shipbuilding parts, pressure vessel components, transport and vehicle parts, and architectural and decorative trim.
Choose 5052 for excellent corrosion resistance, especially in salt-water environments, and for welded or formed parts. Choose 6061 when you need higher strength and easier machining. 5052 cannot be strengthened by heat treatment.
Typical lead time for Aluminum 5052 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Aluminum 6061
View material
Aluminum 6082
View material
Aluminum 6063
View material
Stainless Steel 316
View material

