Plastics

Acrylic (PMMA) CNC Machining

Upload your CAD file for a custom CNC machining quote in PMMA (Acrylic), with parts shipped across the USA and Canada.

CNC machined PMMA (Acrylic) part

What is PMMA (Acrylic)?

PMMA, also known as acrylic or Plexiglass, is a highly transparent, low-cost plastic that is easy to machine and widely used as a glass substitute.

After CNC machining, surfaces are matte and translucent by default. Light scratches can be removed with polishing paste. Frequent applications are lamps & lighting, displays and food industry. A quoted tensile strength of roughly 83 MPa is a practical starting point when sizing parts. If you are unsure whether PMMA (Acrylic) suits your design, our engineers can review it and suggest an alternative.

Parts are CNC milled or turned from clear stock. Please note if a fully transparent finish is required. Finish options (matte / translucent as machined) are confirmed with your quote.

3DMITECH machines PMMA (Acrylic) parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

PMMA (Acrylic) properties

Mechanical properties

Ultimate tensile strength
83 MPa (12 ksi)
Yield strength
80 MPa (12 ksi)
Modulus of elasticity
3.3 GPa (0.48 Msi)
Elongation at break
3–6.4%

Physical properties

Density
Not specified
Hardness
105 HRM
Light transmittance
90–92%

Thermal properties

Maximum service temperature
80°C (176°F)
Thermal expansion coefficient
90 × 10⁻⁶ /°C (50 × 10⁻⁶ /°F)
Thermal conductivity
0.2 W/(m·°C)

Electrical properties

Electrical insulation
Good

Finishing and post-processing

Post-processing
Polishing
Surface
Matte / translucent as machined

Common applications

  • Lamps & lighting
  • Displays
  • Food industry
  • Hand rails & guards

Figures shown are typical published values for PMMA (Acrylic) and can vary with stock form and condition. Confirm any critical property before production.

PMMA (Acrylic) CNC machining FAQs

Yes. Acrylic machines easily and can be polished to a glass-like finish. It is brittle, so it is cut carefully to avoid chipping and cracking.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on PMMA (Acrylic) depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Acrylic is matte or translucent as machined and can be polished to improve clarity.

Common applications include lamps and lighting, displays, food industry parts, and hand rails and guards.

Choose acrylic for the best clarity, scratch resistance and polished finish. Choose polycarbonate for parts that need much higher impact strength, such as guards.

Typical lead time for PMMA (Acrylic) parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.