Aluminum

Aluminum 6063-T5 CNC Machining

Upload your CAD file for a custom CNC machining quote in Aluminum 6063-T5, with parts shipped across the USA and Canada.

CNC machined Aluminum 6063-T5 part

What is Aluminum 6063-T5?

Aluminum 6063-T5 is a lightweight alloy with a natural silver-white appearance. It combines moderate strength, good corrosion resistance and a surface well suited to decorative finishing, making it useful for frames, housings,brackets and architectural components.

The T5 temper means the aluminum has been cooled after a hot shaping process, such as extrusion, and then artificially aged. Aluminum 6063 is commonly used for extruded profiles and heat sinks, where its thermal conductivity and ability to form complex profiles are valuable.

Custom parts can be produced using CNC milling or turning. As-machined surfaces retain fine tooling marks, while anodizing can be specified where available to improve surface protection and appearance.

3DMITECH machines Aluminum 6063-T5 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.

Aluminum 6063-T5 properties

Mechanical properties

Ultimate tensile strength
180–185 MPa (26–27 ksi)
Yield strength
140–145 MPa (20–21 ksi)
Modulus of elasticity
68–69 GPa (9.9–10 Msi)
Elongation at break
11–12%

Physical properties

Density
2.70 g/cm³ (0.098 lb/in³)
Hardness
60 HB
Corrosion resistance
High
Magnetism
Non-magnetic

Thermal properties

Maximum service temperature
160°C (320°F)
Thermal expansion coefficient
23.0–23.5 × 10⁻⁶ /°C (12.8–13.1 × 10⁻⁶ /°F)
Thermal conductivity
200–210 W/(m·°C)

Electrical properties

Electrical resistivity
3.2–3.3 µΩ·cm

Finishing and post-processing

Anodizing compatibility
Suitable
Weldability
High

Common applications

  • Door and window frames
  • Curtain walls
  • transport interiors
  • heat sinks, exhibition stands and shelving

Figures shown are typical published values for Aluminum 6063-T5 and can vary with stock form and condition. Confirm any critical property before production.

Aluminum 6063-T5 CNC machining FAQs

T5 means the alloy was cooled from the extrusion process and then artificially aged. It is softer and lower in strength than the T6 temper, but very well suited to extruded profiles and anodized parts.

It machines readily, but because it is a soft alloy it needs sharp tools and care with burrs, thin walls and loaded threads. It is best for parts where finish matters more than strength.

Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Aluminum 6063-T5 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.

Yes. 6063-T5 anodizes very well, giving an even decorative finish, which is why it is common for frames, trim and display parts.

Common applications include door and window frames, curtain walls, transport interiors, heat sinks, exhibition stands and shelving. For stronger parts consider 6063 in a higher temper, or 6061.

Typical lead time for Aluminum 6063-T5 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.

Still have questions? We’re here to help.

Contact us

See all CNC materials

CNC machined aluminum part ready for production

Get Your CNC Machined Parts Into Production Runs Today

Parts in as fast as 10 business days.

Get Instant Quote

We use optional cookies to understand how our website is used. You can accept or decline. Questions about your data? Contact us.