Aluminum
Aluminum 2A12-T4 CNC Machining
Upload your CAD file for a custom CNC machining quote in Aluminum 2A12-T4, with parts shipped across the USA and Canada.

What is Aluminum 2A12-T4?
Aluminum 2A12-T4 is a lightweight, high-strength aluminum-copper-magnesium alloy with a natural silver-white appearance. It is useful for precision brackets, machine components and structural parts where strength relative to weight is important.
The T4 temper means the material has been solution heat-treated and naturally aged. It provides a balance of strength and ductility for mechanically fastened components, with performance depending on the supplied stock and part design.
Custom parts are produced using CNC milling or turning, leaving fine tooling marks on as-machined surfaces. Protective finishes, such as anodizing or painting, can be specified where available to improve corrosion resistance. The finish should be selected for the intended environment.
3DMITECH machines Aluminum 2A12-T4 parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
Aluminum 2A12-T4 properties
Mechanical properties
- Ultimate tensile strength
- 425–470 MPa (62–68 ksi)
- Yield strength
- 275–325 MPa (40–47 ksi)
- Modulus of elasticity
- 68–71 GPa (9.9–10.3 Msi)
- Elongation at break
- 10–12%
Physical properties
- Density
- 2.78 g/cm³ (0.1 lb/in³)
- Hardness
- 105–120 HB
- Corrosion resistance
- Limited
- Magnetism
- Non-magnetic
- UK / EU equivalent
- 2024 (approx.)
Thermal properties
- Maximum service temperature
- 150°C (302°F)
- Thermal expansion coefficient
- 22.9 × 10⁻⁶ /°C (12.7 × 10⁻⁶ /°F)
- Thermal conductivity
- 117.6 W/(m·°C)
Electrical properties
- Electrical resistivity
- 4.8 µΩ·cm
Finishing and post-processing
- Anodizing compatibility
- Suitable
- Weldability
- Low
Common applications
- Precision brackets
- Machine parts
- Structural components
- Aerospace components
Figures shown are typical published values for Aluminum 2A12-T4 and can vary with stock form and condition. Confirm any critical property before production.
Aluminum 2A12-T4 CNC machining FAQs
2A12-T4 is a high-strength aluminum-copper-magnesium alloy in the naturally aged T4 condition. It is used for precision brackets, machine parts and structural components where strength relative to weight matters.
T4 means the alloy has been solution heat-treated and naturally aged. This gives a useful balance of strength and ductility, which suits mechanically fastened parts.
Yes. It machines well and holds precise features. Because corrosion resistance is limited compared with 6000-series alloys, a protective finish such as anodizing or painting is often specified.
Conventional fusion welding is generally poor for this alloy. Mechanical fastening or other joining methods are usually preferred. Please confirm the joining method at the quoting stage.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on Aluminum 2A12-T4 depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
Typical lead time for Aluminum 2A12-T4 parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Aluminum 7075
View material
Aluminum 7075-T651
View material
Aluminum 6061
View material
Aluminum 6082
View material

