Plastics
FR-4 CNC Machining
Upload your CAD file for a custom CNC machining quote in FR-4 (Glass Epoxy), with parts shipped across the USA and Canada.

What is FR-4 (Glass Epoxy)?
FR-4 is a high-pressure thermoset glass-epoxy laminate with a good strength-to-weight ratio and near-zero water absorption.
It is most commonly used as an electrical insulator with considerable mechanical strength, retaining its properties in both dry and humid conditions. Common applications include automotive applications, electrical insulation and PCBs. A quoted tensile strength of roughly 415 MPa is a practical starting point when sizing parts.
We CNC mill or turn these parts, available in green, yellow or black. Finish options (as machined) are confirmed with your quote.
3DMITECH machines FR-4 (Glass Epoxy) parts for engineers and product teams in the United States and Canada, from a single prototype to repeat production. Upload a STEP file for an instant quote, and add a 2D drawing for critical tolerances, threads or finish notes.
FR-4 (Glass Epoxy) properties
Mechanical properties
- Ultimate tensile strength
- 415 MPa (60 ksi)
- Yield strength
- Not specified
- Modulus of elasticity
- 24 GPa (3.5 Msi)
- Elongation at break
- Not specified
Physical properties
- Density
- 1.85 g/cm³ (0.067 lb/in³)
- Hardness
- 110 HRM
- Water absorption
- < 0.10%
Thermal properties
- Maximum service temperature
- 140°C (284°F)
- Thermal expansion coefficient
- Not specified
- Thermal conductivity
- 0.29–0.34 W/(m·°C)
Electrical properties
- Dielectric breakdown
- > 50 kV
Finishing and post-processing
- Post-processing
- Deburring
- Recommended finish
- As machined
Common applications
- Automotive applications
- Electrical insulation
- PCBs
- Fixtures & test jigs
Figures shown are typical published values for FR-4 (Glass Epoxy) and can vary with stock form and condition. Confirm any critical property before production.
FR-4 (Glass Epoxy) CNC machining FAQs
FR4 machines accurately, but it is abrasive glass-epoxy laminate and produces fine dust, so it needs suitable tooling and extraction.
Our standard CNC tolerance is ±0.1 mm (±0.004 in), with tighter tolerances down to ±0.02 mm (±0.0008 in) available on request. What can be held on FR-4 (Glass Epoxy) depends on part size, geometry and features, so call out critical dimensions on a 2D drawing and we will confirm them in your quote.
FR4 usually ships as machined and deburred.
Common applications include electrical insulation, PCB-related parts, fixtures and test jigs, and automotive applications.
FR4 offers higher strength, excellent insulation and very low moisture uptake. Bakelite is a rigid insulating thermoset that is easier to machine but more brittle.
Typical lead time for FR-4 (Glass Epoxy) parts is 10 business days from order approval. Quantity, finishing and any heat treatment can extend this, and your quote confirms the date before you order.
Still have questions? We’re here to help.
Contact usRelated materials

Bakelite (Phenolic)
View material
PTFE (Teflon)
View material
PEEK
View material
ABS Flame Retardant
View material

